Описание: Siyah Kernel - пожалуй лучшее ядро для Samsung Galaxy S2 с прошивкой Андроид 4.0.3, 4.0.4 (ICS) + 4.1 (JB), с поддержкой Dual-Boot и многим другим..
Динамично развивающееся ядро. Автор работает не один и пытается сделать ядро с максимальной фунциональностью, быстродействием и минимальным энергопотреблением. Функции: множество твиков I/O и памяти, добавлены твики в говерноры ondemand и interactive, добавлен говернор smartass v2, поддержка ntfs, cifs, OC/UV (SetCPU), CWM Recovery, Boot logo, Boot animation, автобэкап раздела /efs, автокалибровка батареи, увеличенный ток зарядки (быстрее заряжается), touch fix. По словам автора универсально и подходит как для стоковых, так и для кастомных прошивок.
- Custom CWM touch recovery with swipe gestures - 8 freq steps (100MHz to 1600MHz) - Underclock support (we have two interfaces for that. both of them are defacto standard) - Tweakable vitalij's value (set to 5 as default) - Fixed fuelalert wakelocks - You can disable android logger using ExTweaks app - You'll have lots of options in ExTweaks. Faster charging mode is one of them. - Cpu governor optimizations - Gpu voltage, clock and stepcount interfaces - Tegrak's touchmove support. you'll have to tweak it with extweaks and test it with touchmove app until Tegrak adds ICS support to the app - Brightness curve settings with original panel gamma values. panel values unchanged, so you will get stock colors and will be able to use supercurio's voodoo display app when it is released. brightness modification will only change auto-brightness response - BLN support (use BLNControl app from the market to enable it) - Better touch sensitivity (especially while charging) - Available CPU Governors: Ondemand (default), Lulzactive, SmartassV2, Interactive and Conservative governors added CIFS - Available I/O schedulers: CFQ, noop, Deadline, SIO (default), V®
v5.0i -> v5.0.1: reverted wifi driver to fix wifi direct & other wifi related problems. touch gestures off when screen is off. analogue headphone amp in stweaks. new & faster stweaks. mxt224e touchscreen choppiness fix. 5.0i: Dual booting with new CM10 + Samsung ICS ROM improved touch sensitivity 5-step GPU added arm topology patches again, with cpupower driver. merged with a JB leak (3.0.31) removed dynamic cpu freq steps. they are all fixed now. removed some settings from ExTweaks interface such as cfstweaks orbot is now working (only tested on Samsung ROM) Reboot into 1stROM, Reboot into 2ndROM in STweaks. (v5.0a2) STweaks added to initramfs. it will be autoinstalled only once. it is my own implementation of uci.sh interface. There is almost no difference (except for resetting to defaults in the last tab) between ExTweaks and STweaks. It’s been used for some time in my S3 kernel and fairly stable. I wanted to put it in the last version of my S2 kernel as well. it is my second android app (first one is FastDormancy app).. it doesn’t have a fancy UI but not bad for a beginner . BLNWW (BLN Without Wakelock). Touch gestures optimizations (thanks to Tungstwenty for the latest changes and for this great feature). added speaker and mic amplification/sensitivity settings which are based on fluxi’s mc1n2 interface, reversed and ported to uci.sh interface by dorimanx, tested and committed to my initramfs by robertobsc. automatic led brightness level. touch voltage level will be ignored if this one is checked in STweaks added B2G support (thanks to [email=atilag@github]e-mail[/email] for the initramfs changes). added an option in STweaks to set a delay in FB earlysuspend to properly play CRT animation (implemented originally by Codeworkx). reverted wifi driver to the one in cm10 kernel fixed auto-brightness issue on CM10. fixed some 2ndROM related problems in recovery when installing zips or restoring backups fixed BLN intensity when auto led brightness is selected. applied latest lulzactiveq tweaks from robertobsc. mali and vsync related changes (mostly from Entropy512′s commits) which are supposed to improve the battery life removed battery and performance profiles. removed lots of cpu governors. available governors: pegasusq, ondemand, conservative, hotplug, lulzactiveq new optional GPU frequency steps. enable VPLL Mode in STweaks but make sure you read the description. fixed a CM10 specific problem with the new GPU steps but it still doesn’t guarantee that the new steps will be stable on your device. added slide2wake (thanks to Fluxi) + some optimizations added mdnie interface and made hardcore’s sharpness tweaks optional in STweaks lulzactiveq fixes by robertobsc and added cpu governor selection back to stweaks Finally fixed vpll problem and made it default (thanks to robertobsc for his helps on testing)
• Дата выпуска:10.11.2012
Внимание! У вас нет прав для просмотра скрытого текста.
• Версия:5.0.1 • Разработчик:Siyah • Версия ОС: 4.0.3+4.1 • Язык интерфейса: Английский ® Root: Да
Внимание! У вас нет прав для просмотра скрытого текста.
• Тест: SGS 2
Установка:
- Скопировать зип архив на карту памяти - Перейти в режим Восстановления (CWM, Recovery, рекавери) - Установить скрипт очистки от предыдущего ядра (install zip from sd-card - выбрать файл) Ultimate Kernel Cleaning Script v2.6.5 500.15 Kb - Установить ядро (install zip from sd-card - выбрать файл)
предыдущая версия стабильнее. на этой заметил такие проблемы. 1. жор батареи 2. собой индикатора батареи(начал показывает не правильно) 3. проблемы с подключением флеш. через usb OTG. * прош у меня MIUI 4.03 (v2.11.9)
...что за процессы происходят в теле с новыми ядрами?! (в спящем режиме оперативка после загрузки тела опускается с 500 до 100мб) ... опять откатился на 3.3.1 (держит 400мб)
Прочел описание, понравилось.
Прочел комменты, не понравилось, поэтому не буду качать это ядро
0 ответить